Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

REC Purchase Timing

CI-v4 EAc6:Green power and carbon offsets
posted by  Jeffrey Palmer  on 

Due to REC pricing violitility it may make sense to purchase the credits earlier in the project. Can RECs be purchased before the LEED project is registered?

1
Fri Apr 30, 2021, 7:44 pm

Zone Discharge and Zone Primary Airflow

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Luke Brooman  on 

I am looking for clarification on the Zone Discharge Airflow (Vdz) and Zone Primary Airflow (Vpz) values under the multiple zone systems.

1
Thu Aug 11, 2022, 1:29 am

v4.1 MRc5 option 2 with MRpc87

NC-v4.1 MRc5:Construction and Demolition Waste Management
posted by  Kyle Roth  on 

Can you use the pilot credit Verified Construction & Demolition Recycling Rates with the v4.1 Construction and Demolition Waste Management credit, option 2?

0

Airflow rates for pressure drop in LEED v4

CS-v4 EAp2:Minimum energy performance
posted by  Przemysław Rejczak  on 

Dear everyone,

For one of our project we received the Review Comment regarding to pressure drop adjustment calculations.

It states that :

3
Thermal Engineer, Energy Modeller
LEEDuser Basic Member
1 thumbs up
Wed Apr 21, 2021, 3:31 pm

Sustainability Scavenger Hunt is On!

Green Commons
posted by  Kristen Fritsch  on 

Built Environment Plus (was USGBC MA- aka Meredith Elbaum's band) has organized this awesome sustainability scavenger hunt.

0

If Schools don't have any of the applicable appliances and water process equipment, can they still go for this credit?

Schools-NC-v4 WEc2:Indoor water use reduction
posted by     on 

For Schools, the LEED v4 Reference Guide states that the project has to meet the percentage reduction requirements AND "install equipment within the project scope that meets the mi

1
Tue Apr 20, 2021, 9:09 pm

LEED and ASHRAE Requirements for an Existing Building Model

NC-2009 EAc1:Optimize Energy Performance
posted by  Tom Nichols  on 

We are modeling a new building for EAc1. There is a small existing building attached to this new building. It is less than 9% of the area of the two buildings combined.

3
LEED Consultant & Mechanical Engineer
Dillon Consulting Limited
LEEDuser Basic Member
1 thumbs up
Tue Apr 20, 2021, 8:45 pm

Aluminum Canopy

NC-v4 SSc5:Heat island reduction
posted by  James Keohane  on 

I am seeking to identify/establish SR value for aluminum canopies.  Canopy manfacturer does not have a clue what I am looking for.  Is there an industry standard SR value for un

2
Director of Sustainability
Fentress Architects
LEEDuser Expert
224 thumbs up
Tue Apr 20, 2021, 7:55 pm