I see that we need to collect responses from a "representative" sample of building occupants making up at least 30% of the total occupants.

Our state energy code is based on ASHRAE 90.1-2004, which I believe does not require ci for exterior walls. ASHRAE 90.1-2007 requires R-3.8 ci for nonresidential walls.

Per addenda number 100000419, interior flat coatings voc allowance has drop down to 50 gr/lt, but what about interior aplications on ceiling? Is it still allowable to have 250 gr/l on flat paints

I have an existing bus garage which will be undergoing major renovations in order to become CNG compliant.

Does anybody know if electric fire pumps are exempted from energy efficiency requirements? That is, from ASHRAE 90.1 section 10.4 minimum efficiency requirements for electrical motors.

Would it be correct to use the "Warehouse, storage" gross square feet per occupant in the Reference Guide for mechanical spaces, storage rooms, loading areas and restrooms of a CS building?

HELP!!! Where do I find 2002 version of this ansi standard? I can't locate anywhere!

What do you do when you want to upload a response to review comments but the credit or PI form does not require any uploads thereby not providing an area to upload the response to review comments?

Just to confirm: total site area within the LEED project boundary - is it the total square footage of all floors in a building plus the surrounding premises?

We are working on a hotel with PTHP units. PTHP units have manual outdoor airflow monitors that, once set, are not adjusted unless the unit is taken apart.