I have two questions regarding exhaust system tests: 1. Do the tests have to be conducted only for local exhaust fans (like e.g.

We are working on a project with two buildings on one site, one commercial C&S, one Hotel.

In the building that I’m modeling some parts were existing prior to the project, some parts are new.

If all of my zone equipment and my chillers prescriptively comply with the Core Performance Requirements, but for HHW we have heat exchangers with purchased steam from a district source, then do I

I am biginner in LEED, for the first time I am meeting with some things.

Do you use Value Engineering in documenting this process?

We have a project that has six buildings on it. The owner wants five of them to be CS, and one of them to be NC. Are we able to mix rating systems within an overall LEED Campus registration?

Our project is hoping to use the v4 criteria (diverse uses) to meet the requirements for a v3 project.

In DesignBuilder for the daylight simulation you have to impose a value for the parameter "margin", which is defined in the following way: Enter the margin (in m or ft) around the zone boundaries w

Dear colleagues, maybe my question will be stupid, but I hadn't found a strict answer, so I'm a little bit confused. We have a project that has no permanent irrigation system, only a has a hose bi