Lauren Wallace
LEED Project Reviewer, LEED AP BD+C, Senior LEED Specialist
Certifications Department Manager, Epsten Group, Inc.
LEEDuser Basic Member
26 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
Is C&S allowed if you are eligible for NC?
LEED Rating System Selection
posted by Isolda Strom on
We are in the very early stages of a project that is considering LEED certification. Demarcation is still unclear, but it the client is interested in all options.
2
Tue Mar 3, 2015, 1:54 pm
Services inside a mall would do?
NC-2009 SSc2:Development Density and Community Connectivityposted by Marcio Alberto Casado Pereira on
We have a project built right next to a shopping center. The shoppping center has more than the 10 basic services inside. WoIuld those 10 sevices qualify?
3
Sustainability Architect
LEEDuser Basic Member
88 thumbs up
Mon Mar 2, 2015, 3:03 pm
G3.1.10 (d) "Heating only System"
NC-2009 EAp2:Minimum Energy Performanceposted by Anil Bhari on
Based upon G3.1.10 (d) “Where no cooling system exists or no cooling system has been specified, the cooling system shall be identical to the system modeled in the baseline building” Does this mean
6
Min engineering inc
LEEDuser Basic Member
2 thumbs up
Fri Feb 27, 2015, 9:51 pm
LEED male/female 50/50 gender ratio
NC-2009 WEp1:Water Use Reduction—20% Reductionposted by Razan Nejem on
Hi Everyone, Regarding one of the FAQ's above in the birds eye view section with regards to gender ratio.
3
LEEDuser Basic Member
98 thumbs up
Fri Feb 27, 2015, 7:20 pm
Sustainable furniture cost >100% total furniture cost
Healthcare-v2009 MRc5:Furniture and medical furnishingsposted by Catherine Adams on
According to the Healthcare reference guide under MRc5 Section 8 Examples: "furniture that meets the criteria for more than one option can be counted twice".
4
HDR
LEEDuser Expert
894 thumbs up
Fri Feb 27, 2015, 5:09 pm
direct reading instruments
NC-2009 IEQc3.2:Construction IAQ Management Plan—Before Occupancyposted by Kelly Bruvik on
Can direct reading instruments be used to measure VOCs and PM10? Another user asked specifically about the GrayWolf IAQ equipment and I was also wondering if it can be used for EQc3.2.
2
LEEDuser Basic Member
27 thumbs up
Fri Feb 27, 2015, 4:23 pm
Validity of the agreement
Schools-2009 SSc10:Joint Use of Facilitiesposted by Maya Karkour on
Dear All, Our project has a signed agreement with a nearby university, valid until June 2013.
2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Fri Feb 27, 2015, 3:36 pm
Simple LEED boundary question
NC-2009 PIf2:Project Summary Detailsposted by jack larson on
My LEED boundary consists of the following: a) A Commercial building b) Three small service buildings ( one which is a substation ) c) A swimming pool d) A tennis court My question is as follows
2
LEEDuser Basic Member
210 thumbs up
Fri Feb 27, 2015, 3:31 pm
Saving percentage round up to the nearest integer?
NC-2009 EAp2:Minimum Energy Performanceposted by Haojie Wang on
Will LEED round up the saving percentage to the nearest integer? e.g. 19.8% to 20%? Thanks in advance
6
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Fri Feb 27, 2015, 2:34 pm
Epoxy floor. Testing laboratories
CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Irina Charkina on
Hello, We have a project in Russia under LEED for CS-2009 sertification. There are technical rooms with epoxy flooring. 1) Can anybody confirm if I am wrong or right?
2
LEED-AP BD+C
GREENSQUARE
LEEDuser Expert
261 thumbs up
Fri Feb 27, 2015, 9:11 am