Our project is a 4-Story commercial office building. We are renovating the entire 4th floor, half of 3rd floor and a portion of 1st floor. The 2nd floor is existing office space.

The guidance document seems very clear that the proposed design distribution losses are to be included when using option 2.

Hi everybody, If you just have sections.Pdf file thru the building, can it be used instead of internal elevations while completing PIF4, and what the caption should say then , section showing inter

Hi Everyone! The project that we're working on will be in a country where the local code requires more outdoor air than 62.1 at most of the zone types.

The credit language mentions that "all flooring materials" should comply with this credit requirements.

I am seeking clarity on the alternative compliance for FloorScore certified materials.

G 3.1.1 of Appendix G performance rating method mentions that Base Line building design shall be based on "usage, no.

Are roof flashing and trim included in SSc7.2 calculations?

Our project in Guam used base material extracted on site and gradated for reuse as aggregate sub-base below slabs and pavement on site.

I am working with an apartment building that does include some smoking residential units and some nonsmoking units.