Log in
Forum » EBOM-2009 EAc5
Topic

10% exemption for fire suppression systems

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by AtSite Inc on Sep 22, 2016, 5:38 pm

Is is possible to exempt 10% of the floor area that has CFC/halon/etc containing fire suppression systems? This project has several restaurants that together constitute less than 10% of the floor...

Last reply: Ben Stanley, Oct 6, 2016, 11:29 am

Leakage Rate in v5 Form

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by Andy Rhoades on May 20, 2013, 6:25 pm

My understanding is that the minimum acceptable Leakage Rate is 0.5%, even if the actual data demonstrate a lower leakage rate. The v4 form accommodated this by allowing the Lr to be manually...

Last reply: Kimberly Hosken, May 9, 2016, 3:23 pm

Pursuing LEED NC streamline path

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by American University on Oct 21, 2014, 12:12 pm

A building earned enhanced refrigerant management for LEED NC but had to add one unit during the performance period due to theft. I'm sure the existing units have probably had refrigerant added...

Last reply: Trista Brown, Jan 31, 2016, 9:42 pm

Compressor replacement + R422D refrigerant

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by Norbert Szircsak on Jan 14, 2015, 4:41 am

Ben Stanley Senior Sustainability Manager WSP- Built Ecology LEEDuser Expert 250 thumbs up November 30, 2015- 5:53 pm Hi Norbert, Did you ever get solid guidance for these issues outside of this forum? For point 1, if the old compressor was decommissioned prior to the performance period, then it could be excluded from the calculation entirely. If not, include it and determine the leakage rate per...

Last reply: Norbert Szircsak, Jan 25, 2016, 5:43 am

Performance period for leakage rate

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by American University on Dec 18, 2013, 5:01 pm

I'm wondering what performance period would be acceptable for calculating the leakage rate (lbs of refrigerant added and over what time frame) for this credit. For instance, does the period over...

Last reply: Ben Stanley, Mar 10, 2014, 11:01 am

End of Life MR Leakage rate

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by Frank Weiss on Dec 18, 2012, 7:51 pm

The end of life refrigerant loss (MR) has a range of 2%-10%. The reference guide says I can use a lower than the 10% default rate if I can demonstrate how the lower rate is justified. How would...

Last reply: Ben Stanley, Feb 6, 2013, 2:44 pm

2% leakage rate

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by Tristan Roberts on Jun 22, 2012, 2:51 pm

Since there has been some discussion on this topic on this forum before, I wanted to make sure everyone is aware of the 11/1/11 LEED addendum stating that "If new equipment is being installed,...

Last reply: David Hubka, Nov 7, 2012, 10:38 am

refrigerant charge formula for r123

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by Pablo Fortunato Suarez on Jan 24, 2011, 5:25 am

Our supplier who does the recharging of refrigerants has a standard formula for determining the refrigerant charge based on minutes per day of purge pump out operation. The values end up being...

Last reply: Ben Stanley, Sep 12, 2011, 11:32 am

Leakage Rate

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by Kevin Kelly on Apr 22, 2010, 11:40 am

90% of the AC equipment at my building has been replaced in the past 2 years. None of that equipment has had refrigerant recharges. How would I go about entering a leakage rate if we have yet...

Last reply: Emily Catacchio, Apr 26, 2011, 1:06 pm

District Energy Documentation

EBOM-2009 EAc5: Enhanced Refrigerant Management
posted by Alexa Stone on Feb 28, 2011, 6:10 pm

Could someone please confirm the guidance and documentation for projects connected to a third party district chilled water loop? Does the utility (chilled water provider) have to provide any...

Last reply: Alexa Stone, Mar 25, 2011, 4:37 pm