More of a solution than a question I suppose;  I was recently provided the following review comment:

-----

The Requirements section of EAp3 in the LEED-EB O+M v2009 Reference...

if actual Rc (lb/ton) of the chiller and other refrigerant units are unknown then will i able to take default.

We have a property with a commercial ice machine, which uses more than 0.5 Lb CFC 502 refrigerant. The machine is located outside of, and well away from the building, but within the LEED...

We have a walk-in freezer and refrigerator that have...

I have completed a Refrigerant Management Plan for a building and when I go to upload it to the EAp3 credit there is nowhere to place it. In the template we have chosen the second option "...

I have a third party report and analysis on my CFC eliminiation options. However, the report was conducted in 2009. Is there a timeline to how long I can use this report to complete the EA P3...

I have a school building with an old walk-in coolers/freezers used in the Kitchen. Those do have CFC refrigerant.

Those type of equipment are only listed/noted in the EA-C5 and NOT in the...

Are you required to provide the manufacturer's specifications, or is it enough to upload the nameplates to LEED? I have an inventory of all HVAC equipment with manufacture name, model, serial...

Hi,

Does anyone knows if the Refrigerant Gas AB-22-A comply with the CFC´s -...

Our project is served by district heat and cilled water plant. The plant, owned by different componay from our project owner, uses CFC refrigerant for some of chillers. It is difficult to do...