I have a large conference room with a folding partition to create two smaller conference rooms. Do I run the simulation with the partition open (one large room) or closed (two small rooms)?

I'm documenting this credit for an apartment building using the v3 supplemental daylight and views calculator. Under "space type" the options are residential: bedroom, residential: dining room,...

We have a Wellness Center project with an indoor pool area of approximately 6,000 SF and a pool surface area of about 4,000 sf within that space. We are using the actual daylight measurement...

We are documenting this credit and ran up against an issue. While we have exhibit spaces currently listed under regularly occupied spaces under Plf2. We are attempting to exclude them for IEQc8.1...

Is it mandatory to run the model on Radiance when the model has been built up on Ecotect?
I have been facing issues on installing Radiance because of my computer windowns version.

I have a couple of questions:
We have a hotel project with 80 villas that are grouped into building blocks of 4 and 6. Would we have to take measurements for each individual villa or could...

To whom it may concern,
We are involving a project going to be built in Uppsala, Sweden. Its aim is to get the LEED 2009 certification for this building.
So to get a point of IEQ...

Dear all,
I'm now working on a project (office building, new construction) under LEED NC v2009 Certification.
Can you confirm that the non-permanent forniture (not used as functional...

I understand that if view–preserving automated shades are incorporated, that the project need not comply with the 500fc requirement. Can someone please help clarify for me the logic that for...

We are doing an addition to a classroom building on a college campus. A ~100 seat auditorium style classroom makes up about 25% of the regularly occupied space of the building. Has there been any...