Dear All:-

Our project is G+3 factory building and a floor area of 1,80,000 Sq.ft

80000 Sq.ft is A/c area and remaining areas are Ventilated by fresh air fans so we take system 06...

We are working on a higher ed. project building connected to a campus-wide district heating/cooling and power plant. The plant consumes gas for direct steam production as well as in a CoGen...

Referencing 90.1 Table G3.1.5: I understand that the envelope for an existing building baseline model should reflect existing conditions concerning thermal properties of walls and windows. It...

I am modeling a museum with separately controlled exhibit lighting. I am using Section 9.6 of 90.1 2007 (space by space) to calculate my baseline general lighting power densities. Section 9.2...

Dear Marcus.....

Greetings...

In one of our project , we have...

Hi All,

I am working on a project with warehouse space which is heated and ventilated with heating capacity greater than 3.5...

We Desined a Dormitory Building ( NC ) already constructed and in operation.
Each door of the bedrooms has a card reader connected to a BMS ( Building Management System ). When the card is...

To simulate the exterior lighting in Baseline Building, i have to model it according table 9.4.5 of Standard 90.1?

Or it is not possible to earn points for exterior lighting systems?

Hi,

When determining the most suitable Baseline HVAC System to use, as this is a function of building area and number of floors. Would you count a basement car park as a "floor". My...

We are modeling a building in EnergyPro that is heating only, with radiant heating panels and ventilation thru DOAS.

We received a LEED review comment stating: "If the heating output...