While the Water Use Reduction Additional Guidance document, (updated August 16, 2010), clearly address’ how to calculate total daily uses both with and without urinals. It does NOT address what...

I have a cut sheet on a faucet the building owners want to use in the public lavatories in their 3,5000 sq. ft.dental building. They and their staff are the only tenants. The psi and the gpm...

We are evaluating dual flush fixtures for our residential project. I see in the Water Use Reduction guidance the weighted average methodology. And they comment on the 1:2 ratio of full to low...

How do you enter a variable flow shower head in the template?

The American Standard flowise 3 function showerhead is a great example:

3 spray settings:
- Turbine spray at 1....

We have a small TI project that is struggling with the WEp1 credit.

We have built out a suite in a building that already qualified for LEED Certified. We are now struggling to get a 20...

We are using LEED 2009 for Retail: NC+MR templates, for one of our projects. In WE Pre-requisite 1Template, there is...

I am working on an elementary school project with flush valve type water closets sized for young children. They are smaller than adult-sized water closets to make it easier for young children to...

Hi, our project is considering installing metering in our showers as a water saving improvement. But we cannot find any baseline in the LEED-online credit template metering showers.
Does...

Is it just me or does the 0.25 gallons per cycle baseline for public metered lavs seem way to high? It's great for the water saving calculation, but it seems to show much water savings that I...

we are working on a hotel project where the residents will also use the water fixtures in common areas like restaurants. in that case what is the applicable baseline? it's true that fixtures in...