Hi everyone, 

We are working on one building that has 2 different programmes. But, only one is going under LEED certification. That means that in GF both programmes appear, but with clear...

Hi, we are building an airport under new construction (2009). The construction works include the concourse, taxi stands and taxiways.  Are we able to draw the project site boundary around the...

I'm currently going through the preliminary design review credits, and I was stumped on the comment for IEQp1: Minimum Indoor Air Quality Performance surrounding the 40,198 sq. ft. documented in...

LEED boundary encompassing 130 acres was established by Civil to include all stormwater treatment. Following Prelim. Design review, they decided to reduce boundary to include all areas affected...

Our existing building relies on (2) metal fire escapes for emergency egress that we are not modifying.  They are full exterior, self supported, and only connect to the building with lateral steel...

Our project consist of multiple buildings on a large site, well our LEED Boundary only includes the main building and surrounding site area.  Is the total estimated project budget for the entire...

In our new facility we have an emergency generator that runs on diesel. If this is the case...on PIf2 should "fuel oil" be checked on the form under energy and water sources, even though its not...

With respect to calculating the "Square footage of all parking areas" . . . is that square footage calculation to include the paved route to access to spaces such as in a  parking lot situation...

We're getting ready to move onto construction phase. During the design phase review, our water efficient landscaping credit was denied.  However, I was wondering if we would be able to reapply...

Hello All, 

We are currently working on a project that has a specific situation in the site regarding its LEED boundary that I would like to double check. (LEED New Construction...