Topic | Recent |
---|---|
Compliant exterior productsPilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Michelle Rosenberger on Feb 20, 2024, 10:45 am
The Cool Walls database of compliant products does not include a wide range of products. Our warehouse project couldn't find an exterior paint that had elastomeric properties in the database. We... |
|
Cool wall requirements valid for colder climate zones?Pilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Brian Trimble on Sep 26, 2023, 10:48 pm
Some jurisdictions across the US are starting to address the heat island effect by instituting various requirements for cool roofs and pavements. It also appears that they are using this pilot... |
|
No more than 25% of the building’s cool-wall area facing away from the equatorPilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Aleksandra Prawda on Oct 8, 2021, 7:22 am
Hi all, I was considering this pilot credit for some projects, however, I have doubts about this part of the requirement: "To avoid disproportionate placement of cool-wall materials on the... Last reply: Zeynep Cakir, Jun 15, 2023, 7:09 am |
|
SIR and TE values of similar color painingsPilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Valeria Padilla on Feb 21, 2023, 4:20 pm
I am struggling finding the... |
|
Cool Walls material equivalent tablesPilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Mariana Guevara on Nov 24, 2022, 11:35 am
Sometimes a material data sheet does not have SR and or TR. Is there a material standard that can be used as refrence to obtain the SR and TE values? Before on LEED v3 BD+C - SSc7.1... |
|
When a material data sheet does not have SRPilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Mariana Guevara on Nov 17, 2022, 5:13 pm
Sometimes a material data sheet does not have SR and or TR. Is there a material standard that can be used as refrence to obtain the SR and TE values? Before, on LEED v3 BD+C - SSc7.1... |
|
Cool Walls- material compliance (pre-cast concrete)Pilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Nicolette Francis on Mar 30, 2022, 10:48 am
Hi, does anyone know if pre-cast concrete can be used to comply with cool walls? it can be used for heat island to assist credit achievement and I am wondering if this same... |
|
Finding Products that comply with Thermal Emissivity ReferencePilot-Credits SSpc154: Heat Island Mitigation with Cool Wallsposted by Stephanie Graham on Dec 7, 2021, 7:52 pm
In the fine print of this credit under the table for adding solar reflectance and thermal emissivity it lists a very recent standard "... |