Log in
Forum » CS-v4.1 EAp2
Topic

Unmet load hours baseline

CS-v4.1 EAp2: Minimum Energy Performance
posted by Ilse van de Voort on Jan 23, 2020, 7:44 am

Does anyone have experience with the credit minimum energy performance for a data center certified according to Core and Shell? In the baseline model, created automatically by DesignBuilder there...

Last reply: Tyler Thumma, Aug 20, 2021, 7:42 am

Minimum Skylight Fenestration Area

CS-v4.1 EAp2: Minimum Energy Performance
posted by Narguess Kh on Jun 8, 2021, 1:55 pm

I am working on a data center and planning to use Prescriptive provisions of Sections 5 through 10 to comply with energy credit. The data hall is greater than 232 m2 but they are not occupied. I...

Last reply: Marcus Sheffer, Jun 15, 2021, 9:33 am

Chiller type for baseline building

CS-v4.1 EAp2: Minimum Energy Performance
posted by Narguess Kh on Jun 8, 2021, 1:06 pm

I am working on a site in which due to the site limitations and building height restrictions wet solution is not feasible. Therefore, air cooled chillers were used which results in a lower COP...

Last reply: Marcus Sheffer, Jun 8, 2021, 1:43 pm

Baseline System for a data center

CS-v4.1 EAp2: Minimum Energy Performance
posted by Narguess Kh on May 28, 2021, 10:17 am

I am working on a Data Center project which is located in Zone 4A. the project is assessed based on C&S. I am confused about the baseline building system selection.

As expected the is...

Last reply: Marcus Sheffer, Jun 8, 2021, 11:29 am

Category of cooling for process load

CS-v4.1 EAp2: Minimum Energy Performance
posted by Narguess Kh on Jun 3, 2021, 11:49 am

How should I categorize the cooling required for IT equipment in data halls. Considering that the cooling in the actual building is provided by air cooled chillers, which are listed in Table 6.8....

Last reply: Marcus Sheffer, Jun 3, 2021, 12:35 pm

Unegulated energy use

CS-v4.1 EAp2: Minimum Energy Performance
posted by Gabriela Mena on Dec 15, 2020, 8:48 pm

Can the process load cost be considered as unregulated energy use for PCIt calculations?

Last reply: Gabriela Mena , Dec 16, 2020, 4:22 pm

Minimum Energy Performance Baseline of an existing core and shell.

CS-v4.1 EAp2: Minimum Energy Performance
posted by Vickie Breemes on Oct 15, 2020, 4:13 pm

Is there an opportunity to utilize a different baseline on an existing building that is fully electric building in lieu of the directed (which is gas)?  In addition, for LEEDv4.1, is it...

Last reply: Marcus Sheffer, Oct 16, 2020, 12:52 pm