Hello,

We have a question regarding the validation of LEED VOC requirements for a group of specific colored paints belonging to a line of paint from one manufacturer.

In a LEED v3 project a manufacturer is supplying information that his carpet is complying with AgBB 2015. For LEED v4 this would be sufficient (as far as I know newer standards are accepted).

Fixtures are labeled as a certain GPM--1.5, for example. However, depending on the PSI, which the plumbing engineer can provide, the actual flow rate may differ.

Our project is a small addition (<10% of total building GSF) to an existing building.

Our intention is to reuse stormwater and condensate for at least 20% of the make-up water for the Cooling Tower.

Dear All,

could I use the LEED Core&Shell despite LEED Retail, for a supermarket if the fit-out will not be owner responsibillity.
Thanks in advance,
 

For this credit, are motorcycle parkings spaces also included or only car parking?

I have an HVAC system that will use a DOAS unit to supply neutral temperature air in a humid climate (climate zone 2).  The proposed DOAS unit utilizes a dessicant wheel with reactivation

I am working on a project where the Owner Project Requirements and Basis of Design were created at the appropriate times.