Greetings,

At the moment we are creating an energy model for a big warehouse, consisting of three floors.
In this warehouse, there are huge areas with cold stores for various...

About Mandatory Provision ASHRAE 90.1-2010 point 5.4.3.2 Air Leakage. Must this prescription be applied also to fenestration and doors of a warehouse not heated or cooled? We are in Climate zone...

Hello!

We have a warehouse project with small area of office. We just modeled elevator loads using the scheduel from ASHRAE 90.1-2010 User's Manual, which is only 3.5 hours per week. Then...

Hello, 

I'm currently working on a warehouse house project. We are following the Option 2. Prescriptive compliance: ASHRAE 50% Advanced Energy Design Guide.

According to the Guide,...

In the building I am modelling there is a big warehouse that is heated partially only (where the workers are more active, i.e. close to the loading bays). In the model could I divide the...

Hello everyone,

I have a project where it is a warehouse without an HVAC system for the storage area, only office space is conditioned (roughly about 10 % of GFA). The storage area is only...

Dear Everyone,
Could I find out how to solve the problem of natural ventilation in LEED v4. How should it be demonstrated that the amount of air in the building will be guaranteed? Can I...

Good morning, we have a building in process of LEED BD + C Warehouse ... It is a building made up of a part of offices and a part of a warehouse with an industrial process. The office cover is...

I noticed that three options are available for the energy performance credit:
1) whole-building energy simulation, 2) Prescriptive compliance: ASHRAE 50% Advanced Energy Design Guide, and 3...