Hi,
anyone got any experience with the Alternative Compliance Path WEpc94 – No Cooling Tower? http://www.usgbc.org/...

We do small renovations and have never installed or replaced a cooling tower. Do I still have a "no" credit even if I can't meet the criteria of the credit because we don't have the equipment?...

Hi all,

Our project is using Munters cooling tower in which the cooling tower cycles measured continuously and the dump cycle adjusted accordingly. Therefore, the requirement for measuring...

For a "non-engineer," could someone please explain what I'm hearing on the project testing this pilot credit--operator concern that cooling tower won't perform as designed and water-testing...

The credit requirement #5 asks for a "diagram showing meter locations, sand filter.:
Is a sand filter required to meet the credit?

How do you determine the predicted acceptable corrosion rates for each pipe material in the condenser water system?

Our project is pursuing an ID point for Pilot Credit 17 under the LEED-NCv2009 rating system. In reviewing the requirements, we had submitted an inquiry regarding "verification that there will be...

When the credit requirements ask for a "one-time" potable water analysis to be conducted, what sort of time-frame is required for this to be completed? If I'm working on an...

A long-term healthcare project I have been working on that was registered under LEEDv2.2 recently got resistance for submitting LEED HC WEc4.2 as an ID credit. Our review came back requiring us...

In the new version of Pilot credit Revised at 1/3/2012 they ask to be done one-time potable water analysis. How do we do if our project already covers 100%...