In ASHRAE 90.1 Table 6.5.6.1 - Exhaust Energy Recovery Requirement where they mention % Outdoor Air at Full Design Airflow Rate are they referring to the "minimum outdoor air" value ? The outdoor...

The workbook available on the USGBC website does not appear to be properly updating when changing the climate zones. Here are some examples for k-12 schools:

• Climate zone 6 in the...

Hello all, 

I'm working on a 20,000 sf fit-out project that is part of a 500,000 office building. The 50% AEDG Small/Medium Office Building includes buildings up to 100,000 sf. I wanted to...

Hi All,

Is it possible and if so, how would you justify savings in plug and process loads for an interior fit out energy model vs baseline? Can you claim a percentage reduction if

...

Hi,

while reading the ID+C guideline (EAp2, p.140) I see that:"Some efficiency measures that no longer need to be modeled using an exceptional calculation method include low-flow water...

Hello,

I'm working in a ID+C:(CI) for a office's building. This project registration was after Martch 1,2024 so is subject to the v4 2024 Update and I'm wondering how to calculate the ...

Do laptops need to be included within this list? Also, does any old equipment such as old laptops or others have to be included in the list as well, or are we only looking at the new equipment...

I am looking into the Equipment and appliances points for the perscriptive path. What documentaion is required to show the percentage of energy star products? Is there a list for what needs to be...

Hello users
In summary, we compare our proposed scenario (project building) with our baseline (ASHRAE 90.1) while modelling the tenant occupied areas on an office building (commercial...

Hi users,
In general, For energy simulation, we modeling the tenant occupied spaces on an Office building (Commercial interior) by comparing our proposed case (project building )with our...