I'm designing a grocery store.  I have reviewed chapter 5 of the 50% AEDG for grocery stores and found that I can use the SZVAV DX with DOAS (HV6). The guide states that I should meet or exceed...

Dear all, I am doing a CI-v4 eQUEST modeling. There are two chillers and shared by two buildings, but our project is just one of the floors. I know that the chiller input should be a ratio of the...

The facility in which we are designing a 20,000+ square foot office space project is served by the old Carrier moduline units.  Is it possible to get EQ prerequisite Minimmum Energy Performance...

does anyone know if there is a default table for equipment and appliances with rated power in V4 like there was in V3? Thanks

I'm working in a restaurant to be located in a space contained in an existing building. This space has 2 facades to outdoor space, but the owner don't let us modify any element of the existing...

Hi, 

We have a CI project and we are specifying a 18 kW tankless electric water heater, table 7.8 from ASHRAE 90.1-2010 does not specify any requirements for this type of heater as it does...

Hi, 

I am modelling a CI offices that are in a CS certified buulding, in order to select the HVAC system type for the baseline, it is stated in the guide that this must be based on the...

This question is regarding the Energy and Atmosphere prerequisite Minimum Energy Performance and associated credit Optimize Energy Performance under the LEED v4 Interior Design and Construction...

My project is an office tenant fitout (1 floor in a high-rise building). We are going with Option 2 - Prescriptive Compliance and we are relying on...

Hi,

The projects space is served by the...