Hi,

I am modeling one floor of a 31 story building, I would like to verify the following:

- In may case, the whole building has the same schedule, so I am using the Adjustment...

Our project is pursuing LEEDv4 EA Minimum Energy Performance Option 2 in a new commercial office space in a new building. The building finished construction this year, and our office spaces will...

Dear All,

We are currently modelling a CI project. The...

Hi ALL,

Our project has a newly purchased conversion type water dispenser. From the manufacturer cut sheet, there are three rated power values, 2000 W (making hot water), 245 W (making ...

We are seeing no requirement to document the ASHRAE compliance portion of the Prescriptive requirements. Only Target Finder and the lighting and equipment/appliance information appears to be...

ASHRAE 90.1 2010 9.4.1.2 Space Control states: 

"Each space enclosed by ceiling height partitions shall have at least one control device to independently control the general lighting...

Hi all

We are working in an office project that we would like to apply to the commercial interior LEED Certification. The office is in an existing building, with a surface of 1.500 m2. The...

In a LEED v4 CI project, we have a floor that will architecturally stay the same. New HVAC and new lighting fixtures (same ceiling and placement though). The floor core will be gutted (new...

Hi all,

I have a question regarding envelope U-values for ID+C scheme when following whole building energy simulation option. The project we are working on consists on a fit-out of 4 ...

Hi,

I am modeling a tenant improvement with an existing shell, new lighting and HVAC. The report is showing 16.5% savings with no renewables and 31% with renewables. I have just filled out...