The credit states that we can "use the COMNET modeling guidelines and procedures to document measures that reduce unregulated loads". In early June, I found the guidelines on COMNET's website in...

Dear Kudos,

One of our LEED V4 ID+C: CI projects has been registered following the new energy update (effective after April 2024). As per the updated requirements, we are required to...

So we are facing a new Commercial Interior project that only takes up approximately half of a floor.  The problem we are facing is if we can conduct an energy model for half of floor.  The space...

Hi,

I'm faced with a new issue I haven't experienced in the past. I'm working on an energy model for a building in a state where the energy code is 90.1 2007, but is applying for LEED v4...

Hi all,

I have a doubt regarding a CI project. The building is served by Dedicated Outdoor Airflow Systems (DOAS) that serves several floors. Our project is regarding only one floor. As...

Hi everyone, sorry if this is a bit obvious, it is my first time working with this type of LEED certification. I am working on a refurbishment project for an office space, I have made my energy...

In LEED ID+C: v4 : Commericial Interior project have commercial kitchen space (Veg & Non veg), then which are the credit has been impact. 

Dear...

Since I'm pursuing the prescriptive method of this prerequisite, I am filling out the entire AEDG.  For the Daylighting and Lighting section, it asks for interior surface average reflectance in...

Hello!  We are working on a stand-alone building interior, ...