Forum quick links
Table IEQc7.1-1 Design Air Speed at 3 ft ht (ft/min)
NC-2009 IEQc7.1:Thermal Comfort—Designposted by Ed Kokosa on
I thought that I did this yesterday, but lucky for you it didn't post so I'll keep it much shorter on this try. Is everyone just making up numbers for this input? Unless you have a downward blowing
One Screen for two purposes
NC-2009 IDc1:Innovation in Designposted by Omar Elrawy on
Dear all, I have two questions, the first: Can we achieve the credit by one screen that shows both; Building's LEED related data, and the owner company advertisement, that will keep looping all day
Discounted Permits as Preferred Parking?
NC-v4 LTc7:Reduced parking footprintposted by Nathan Gauthier on
Have people tried using discounted parking as preferred parking for this credit?
Hiring CxA for Construction other than one hired during Design
NC-v4 EAc1:Enhanced commissioningposted by mohammad Hassan on
Can a different CxA for a project Construction Phase be hired other than the one hired during Design Phase ?
v4 SSc6 - Hardscape requires a minimum of 0.2 fc to be counted
posted by Bill Swanson on
Been awhile since this thread has been used. This has come up on a project and we lost on appeal so I'm sharing this information with everyone. Any area being claimed in the wattage baseline calc
list of approved programs?
NC-v4 MRc4:Building product disclosure and optimization - material ingredientsposted by emily reese moody on
I could have sworn I saw a link somewhere in LEEDUser to a list of approved programs to use for this credit (that also gets updated as USGBC adds more programs), but can't find it now. Did I imagin
CARB and ECO-Certified
posted by Erika Duran on
I have a sub that just submitted documentation for Particle board that is "Third party certified (California ARB approve TPC-1) to comply with CCR 93120.2 (CARB Composite Wood ATCM).
Pending Systems for Commissioning
NC-2009 EAp1:Fundamental Commissioning of Building Energy Systemsposted by Shabari Shaily Gerber on
Hi We are currently busy with LEED documentation of a manufacturing facility that is under operation for a year now.
Ground-Mounted Solar PV Arrays
NC-2009 SSc5.2:Site Development—Maximize Open Spaceposted by J Douglas Dietrich on
If there is an open space with (1) a ground-mounted solar PV array and (2) native plantings or adapted vegetation beneath the PV panels and around them so as not to block sunlight, would the area b
BD+C New Construction - New Stadium
NC-v4 MPR2:Must use reasonable LEED boundariesposted by Quentin Jackson on
Hi all, I'm preparing to register a new project (new stadium) and would like to double check that it is a 'single building'.