Forum quick links
Exhaust rate Table 6.5 ASHRAE 62.1 Clarifications for toilets
NC-v4.1 EQp1:Minimum Indoor Air Quality Performanceposted by Alessandro Zuanon on
Dear all,
some questions about exhaust flow rates to be used for toilets form table 6.5 of ASHRAE 62.1:
Indoor Water Use calculations for Daycare
NC-v4 WEp2:Indoor water use reductionposted by Divya Shroff on
Can infants and toddlers be excluded from indoor water use calculations for a daycare facility? Given that they will be using diapers rather than water closets or lavatories.
selection between BD+C: CS or NC
posted by Kyu-min Lee on
I am working on the Leed project for the elderly care facility (nursing home).
Nearly-Zero Energy Building (NZEB) standard?
Pilot-Credits INpc164:EU Taxonomy for Climate Change Mitigationposted by Eric Shamp on
Has anyone found a suitable nearly-zero energy building standard for projects located in the US, or specifically in California?
Athletic Fields and Playground turf exempt? what about theatre / assembly spaces that may have turf?
NC-v4 WEp1:Outdoor water use reductionposted by Lou Niles II on
Hello,
LEED v4.1 Option 2 for LEED v4 compliance Electric vehicles
NC-v4 LTc8:Green vehiclesposted by Erik Heuler on
There are some differences between LEED v4 and v4.1 requirements for Electric Vehicle charging.
Overall Feedback on Pilot Credit
Pilot-Credits MRpc87:Verified Construction & Demolition Recycling Ratesposted by Kavita Karmarkar on
As our project is located in Northern CA, it is not diffidult to achieve this credit as there are many haulers with third-party certified diversion rates (RCI) in the area.
MRpc87 Verified C&D Recycling Rates
NC-v4 INc1:Innovationposted by Kath Williams on
This pilot credit was very easy to achieve because the project is in California. Our hauler held Certification of Recycling Rates issued by the Recycling Certification Institute.
HPD: products with same technical charachteristics but different thickness, are considered distincts products (BA13/BA15, BA18)
NC-v4 MRc4:Building product disclosure and optimization - material ingredientsposted by Sara BENLOUBA on
Hello everybody,