Hi,

For the requirements of the option 1 - Interior lighting for residential spaces, the reference guide identify a list of individual and multioccupant spaces but it is not clear which...

Our project has a series of exam rooms that we classified as individual, since it is for a particular task with one staff and on additional person. The...

In NYC, there is building that the clients are looking to see if it complies with undergoing LEED certification under a Local Law.  They pretty much ask for what could be included in the scope of...

Hello,

1) When persuing strategy G by measuring iluminance with a light meter after construction, is there any specific procedure that must be followed? For example, when measuring...

For individual occupant spaces, if the overhead lighting is controlled by an on/off switch, and each individual space is provided with an on/off task light (desk...

Hi,

we are evaluating the LEED certification potential of a new winery that will be built in Portugal (using the rating system LEED BD+C: New Construction and Major Renovation)....

Since the Option 2, strategies F (partitions), G (floor, wall and ceiling) and H (partition) excluding the fenestrations form calculation, I'm wondering if the exclusion can be apply for the...

LEED requirement says that Lighting for any presentation or projection wall must be separately controlled. Our project have small multiple meeting room where hanging on the wall TVs are...

There is a garage space that acts as an auto service...

For option 1, is it acceptable for manual controls to be accomplished via a software interface rather than a physical switch? In the vision for this project, users can control lighting in their...