We have a 2-story building with multiple independently operating HVAC systems.  We are looking for guidance on how to log temperature and humidity during the flush-out.  The temperature will be...

Does anyone have a rec for simple testing equipment to meet Option 2?

Thanks!

Hi all! 

I cannot find the reference point in the USGBC Reference Guide or in the standards where it states the amount of tests required per square foot for LEED version 4. Is it 1...

Does anyone know of any differences in the LEED V4.1 and the LEED O+M...

If we have a separaetly HVAC served storage garage that is quite large and mimininally heated, does this area have to be included in the whole building flush and maintain the higher than normal...

If a project conducts air testing prior to occupancy and fails in a handful of spaces, must those spaces remain unoccupied until after corrective action and passing retesting occurs, or can...

Hello,

We have a project in Bourne, MA, that is learning towards Option 2...

Hey, I am working on a office project which will have no mechanical ventilation, and where it was decided to persue the flush out path for "IEQc4 Indoor Air quality Assessment".

Now I am...

Are there guidelines on how to determine how many air samples need to be collected to comply with the...

If the humidity exceeds the range (higher than 60%) for a couple of hours, can the team simply add those few hours onto the flush-out, or does the flush-out have to start completely over at the...