Log in
Forum » CS-v4 EQc2
Topic

Inherently non-emitting: Gypsum board?

CS-v4 EQc2: Low-emitting materials
posted by Ward Miller on Oct 1, 2018, 4:58 pm

Gypsum board is not inherently non-emitting, but you'll find it's easy to find Greenguard Gold certification for all the major brands.   Log in or register to post comments 0 Vote up! How does one determine VOC content from the Greenguard Gold Certification? I'm not very good at interpreting the data on page 2. Log in or register to post comments 0 Vote up! There was a helpful comment from Scott on this thread about the Greenguard Gold certificate language:  https://leeduser.buildinggreen.com/forum/greenguard-gold-certificate  Essentially, the Greenguard Gold standard means...

Last reply: Michelle Rosenberger, Jan 6, 2022, 11:00 am

Flooring materials applied in the lift car

CS-v4 EQc2: Low-emitting materials
posted by Ray Chan on Oct 22, 2021, 1:15 am

My project intends to apply sealant and sheet vinyl as the flooring materials in the lift car. Please advise whether the mentioned materials can be exempted from EQ2. 

Last reply: Deborah Lucking, Oct 29, 2021, 11:55 am

Emicode EC1plus with testing standard ISO 16000

CS-v4 EQc2: Low-emitting materials
posted by Hanna Oberg on Nov 11, 2020, 12:57 am

Hello

I have receieved a test report from an accredited testing laboratory. The test results are compared to the relevant requirements in Emicode EC1plus and the material passes. The test...

Last reply: Muhammad Mahasneh, Dec 7, 2020, 9:35 am

VOC Content- Bitumen Primer

CS-v4 EQc2: Low-emitting materials
posted by Ann E on Mar 4, 2020, 12:03 am

Hi,

We have this Bitumen Primer material applied on site. The contractor submitted it's data sheet but no...

LEED v4 Low Emitting Materials- Consistancy with testing methods

CS-v4 EQc2: Low-emitting materials
posted by Estra Marku on Jan 24, 2019, 11:56 am

Do all of the adhesive/sealant products used on our LEED v4 cs project need to be consistent with one testing method? For example, if one of our...

thinner

CS-v4 EQc2: Low-emitting materials
posted by ilse angel on Oct 18, 2018, 1:00 pm

Hi! does the use of thinner for cleaning purposes falls within the scope of this credit?

Do we have to comply with the requirements of the rule 1143?

Thanks!

thinner use for cleaning purposes

CS-v4 EQc2: Low-emitting materials
posted by monica castro urbina on Oct 11, 2018, 5:18 pm

The construction team want to know if the thinner used to clean the formwork for concrete slabs in the post-tensionnnig method have to comply with the...

Flooring Minimum

CS-v4 EQc2: Low-emitting materials
posted by Michelle Rosenberger on May 17, 2017, 2:43 pm

We have a CS warehouse that is struggling to achieve certification that will build out only restrooms and has no identified tenant to execute a lease agreement with. These restrooms will have...

Last reply: Tristan Roberts, Aug 26, 2017, 1:07 pm