The majority of our Core & Shell warehouse projects are cold, dark shells with no tenants. We do not see a path for these projects to achieve certification at all in LEED v4 C&S.

As I understand it, IDC projects are required to use Actual Materials cost and to include furniture in that cost.

We have a project with a support building with no FTEs, hence, it is not a certifiable building according to the MPRs and we will only be using it to count the materials waste management.

Greetings, The project we are modeling is a huge one - a little more than 900 000 sq ft and it is not C&S.

We are attempting Op. 2: Community Connectivity on a college campus. We have plenty of services on campus that are open to the general public to meet the requirements.

Our LEED project site falls within a larger medical campus which has a campus-wide stormwater management plan which meets the credit requirements.

Dear Concern:- Greetings Our project is G+5 but A/c spaces are located in 3 Floors only and A/c area is totally below 10000 Square feet only (electrical heating only) so we have some queries in

If Option 2 for an air test fails, the remedy is .... "....conduct an additional flush-out with outside air and retest the noncompliant concentrations. Repeat until all requirements are met.

The tracking form is now asking for average ADC produced by the sorting facility. This isn't part of the reporting we get from them. Is this optional?

We recently received a review comment that said that we could not count the services located on our university campus and freely available to all of our project's FTE.