Pending our participation in this forum, we have met all the documentation requirements for this pilot credit, so I thought I would share some tips. 1) Potential Design Strategy: Our project is a

If you have submitted this credit please post if it was awarded or not. If you abandoned the credit at some point in the process when and why? Thanks.

Hi all! I have a doubt about EPD, could someone help me? This credit explains that products with LCA (ISO 14044) or EPD (ISO 14025) that have at least cradle-to-gate scope are valued as 1/4.

For a warehouse, can I deduct the permanently fixed high racking coverage area from the gross floor area, and focus my 75% daylight coverage on the aisles and landing spaces only? I say yes.

Theoretically one might think modeling the glazing and shadowbox portions of a curtain wall with a single assembly u-value would yield the same result as modeling the curtain wall as glazing for th

Hi Everybody, ASHRAE 62.1 currently outlines a minimum ventilation rate for all room types, regularly occupied or not (i.e.

Hello, I'm working on a CS Project larger than 300,000 square feet.

I have several pre-rinse spray valves that were specified by an external laboratory consultant in a college laboratory building that do not appear to meet the requirement of being less than or equa

Hi, I have a Core & Shell Project that will be installing a Green Roof after the Post Construction stage (i.e.

Greetings, I'm trying to find a benchmark comparison report for manufacturing plants but have had no luck so far.