Dear All,

We are currently certifying a large office building using LEED v4 BD+C Core & Shell.

The...

Hi there LEEDuser-verse,

Has there been anyone who has documented the installation of future tenant metering via a tenant lease agreement or an email acknowledgment between the owner and...

Good morning,

Would like to clarify if subtraction metering may be used in Core & Shell for the...

Hi All, 

I would like to clarify if every tenant spaces owned by different tenants requires individual set of advanced meters?

For example, assume there are 20 retails shops (owned...

Hi all,

If a core and shell building has an electric chiller plant supplying chilled water to all tenant floors’ AHUs, is the chilled water considered as another type of energy source and...

I am somewhat confused comparing the requirements of C&S and New Construction. In C&S requirements there is no statement about 10% of energy end use; to me that means advanced meters only...

I assume C&S can achieve 1 point with this credit but the Reference Guide doesn't explicitly say 1 point.

"This credit applies to:

New Construction (1 point), Core and Shell,...

In the credit language for Core & Shell is stated that a sufficient number of meters should be provided to capture total tenant energy use with a minimum of one meter per energy source per...

Hi,
We are providing condenser water to the floors of a core and shell building for tenant installed heat pumps throughout. The advanced metering credit for core and shell says to install...

Has the credit criteria for Base Build M&V been removed from V4 Core & Shell or has it been built into another credit ?