Hi, I'm working on an office C&S project.  Up until recently the MEP strategy was natural ventilation of all tenancies and for this reason the tenancy was envisaged to be modelled that way....

Hi all,

I need help with these three questions:

Case 1) when a proposed building is supplied with purchased chilled water, but a VRV system serving a server rooms is supplied with...

I am working on a project that includes some limited core areas such as lobby, electrical rooms, restrooms, etc. and spaces allocated for future tenants. The HVAC systems are being designed under...

I’m working on a LEED v4 C&S office building and there are no tenant lease agreements associated with the tenant area mechanical systems (Client does not want to impose any restrictions on...

What should be the EAp2 baseline consideration for snow park/ski park within a mall in UAE.

Hi all,
Is Ireland...

Hi all,

I have a problem with Minimum Energy Performance Calculator for v4. I need to choose the...

Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up June 30, 2017- 9:57 am This is probably not the best place to ask software specific questions about how to model something. You can try BLDG-SIM at onebuilding.org or some of the other discussion forums or the Energy Plus help desk. If the software can't model your system directly then you would need to employ a work around. If you do so for LEED you must follow the exceptional calculation method and ideally base your work around on something that has been published. Often manufacturers of equipment...

Hi all,
I need to model water humidification section of air handling unit.
The software I was using is Design Builder + Energy Plus, that don't have the possibility to insert a water...

Hi all,

We have a LEED v4 CS project which use purchased chilled water and purchased heat. According to ASHRAE 90.1-2010 G2.4 "Annual energy costs shall be determined using either actual...