If attempting to make use of LI 10371 for garage demand control ventilation how should the proposed model be differentiated from baseline to take advantage of CO sensors? Is it the (i) cfm, (ii)...

Hello,

I am currently modelling a laboratory building in which all spaces are ventilated through...

Hi All,

I have a question regarding modeling treated fresh air (TFA) unit system. The proposed design includes a separate TFA system with heat recovery wheel and cooling coil to treat the...

Hello Marcus,

This is a bit of a different post as I am wondering what your thoughts are on claiming energy savings from non-regulated energy loads. USGBC has allowed various paths (ACPs,...

I'm working with a large scale multi-floor distribution center and trying to determine the correct...

Hi all,

I have a doubt related with the Minimum Energy Performance Calculator for v4. 

In "Performance_Outputs_1" tab, particularly in "Performance Rating Method Compliance report"...

Hi All,

We are working in a pharmaceutical industry project which has a conditioned area of 78000sq.ft; as per ASHRAE 90.1 2010 the baseline case system is System 6 – Packaged...

Hi, I am trying to work out how to apply Addendum ah for ASHRAE 2010 for system 5-8

"G3.1.3.18 Dehumidification (Systems 3 through 8). If the proposed design HVAC system(s) have...

Hello,

I'm working on an office building with a DataCenter. The Energy Model shows an energy gain of 1,4 % for the Data Center which doesn't achieve the minimum requirement threshold of 2...

I'm modeling a commercial building that has 7 conditioned floors and is heated and cooled by 3 electric heat pumps. According to TABLE G3.1.1A the baseline model should be a System 8....