Hi 

I was filling up the minimum energy performance calculator (Choosing a DC). The final performance output sheets asks me to fill in the start up IT load energy consumption for both the...

Dear All, 

I am working on a project which has two parts, A & B. Part A is an existing building with a new fenestration system and piping system, but all other systems are existing....

Hi all,

I was wondering if I could pick someone's brains regarding the unmet hours test when running an energy model for ASHRAE 90.1 App. G compliance.

So far we have been sticking...

Hi All,

In term of mandatory of ASHRAE 90.1, The lighting in the sidelighting must use photocontrols to change the general lighting level in the primary sidelighted area to reduce the...

Hi All,

Is there any ASHRAE 90.1.2010 Appendix G Energy Model guideline for laboratory building?

Thanks..

We are currently working on a naturally ventilated project located in Lima, Peru and we are having problems achieving the minimum 5% saving in energy consumption for the energy prerequisite. The...

Hello,

I have a question regarding an elusive USGBC document regarding a "mandatory checklist for USGBC approved alternative energy code" and is mentioned in some of its articles regarding...

Dear All,

 
According to the section “Further Explanation” of the LEED Web guide, projects that are served by district energy systems (...

Question regarding a project that is registered as NC. The project is a approximately 70% residential (NC) and 30% core & shell office. When calculating the energy credit - is there a way we...

I assume the Standard must be followed when the User’s Manual contradicts it.

90.1 – 2010, Standard

9.4.1.3 (b)           “….reduce lighting power of each luminaire by a...