I am working on a project that has a vehicle wash...

I see that water-bottle fill stations / drinking fountains are not on the list of fixtures in the calculator. Do we just leave those out of the water savings calculations? Or should they be...

Hi,

we’re currently evaluating LEED compliance of an office building. In what relates with showers, LEED default usage patterns points that 10% of building occupants (FTEs) are expected to...

Hello to all,

My building uses water for the toilets and for the irrigation from a municipally sewage treatment plan with biological treatment.

Does this source count as...

Hi,

according to Reference Guide, Nonpotable water is water that does not meet drinking water standards.

Given this, if water from well is classified as Nonpotable water by...

Hi,

we are currently certifying a building in Europe, where sanitary equipments are typically tested and certified according with its performance at 3 bar pressure. Sometimes it is...

Hi,

we are currently certifying a building that will not be endowed with process water equipments (dishwashers, food steamers, etc). Given this, do we automatically earn the two available...

Hi all,

In LEED 2009/v3 the assumption for metered/sensor cycled duration in public lavatories was 12 seconds, per USGBC issued WEp1 "additional guidance" & the excel calculator notes...

Can you please clarify what is ment by the requirement for steam system : reclaim and use condensate  - 100% recovery and...

If a project is using reclaimed greywayter and rainwater stored in a cistern to flush toilets in a building how would one properly account for that on the LEED Indoor water use reduction...