Dear all LEED users,

Can streetscape can be excluded from a project boundary if it's required by municipality?

We are currently considering pursuing this credit for a project. However, I am not sure what the definition of an "approved data provider" would be.

Its mandatory to have CO monitor installed in every residential unit. Does LEED specify how to use the output from the CO monitor?

We are looking at a Data Centre that is targeting LEED certification in Australia, but struggling to get many energy points due to the high proportion of IT equipment as the total electricity of th

The requirement states that “Any automatic control device required … shall either be manual on or shall be controlled to automatically turn the lighting on to not more than 50% power”

This was always an easier credit to get, particularly in CA. It is unfortunate it does not seem to be valid anymore.

This was always an easier credit to get, particularly in CA. It is unfortunate ot does not seem to be valid anymore.

Our rainwater calculations are right on the cusp of reaching the 90th percentile and earning the full three points (+ regional priority point) for this credit.

This tip sheet is very useful.  Any plans to get a v4.1 version up?  Thanks.