Log in
Forum » Healthcare-v2009 MRp2
Topic

High Pressure Sodium lamps--interior or exterior?

Healthcare-v2009 MRp2: PBT source reduction - mercury
posted by Maria Unruh on Aug 28, 2015, 10:55 am

The table MRp2-2, is this for HPS lamps for the entire project or for the interior only?

Last reply: Tristan Roberts, Aug 26, 2017, 8:23 pm

Providing dedicated area for mercury-containing products?

Healthcare-v2009 MRp2: PBT source reduction - mercury
posted by Richard Barlow on Feb 22, 2016, 9:37 am

We are trying to respond to Prelim. Design review comments on a LEED-HC v2009 project for an Inpatient Hospice and Palliative Care facility.

We're being required to "provide a dedicated...

Last reply: Richard Barlow, Feb 25, 2016, 9:24 am

MRp2-2: High Pressure Sodium Lamps

Healthcare-v2009 MRp2: PBT source reduction - mercury
posted by Ashley Johnson on May 6, 2015, 10:21 am

There are no HPS lamps installed on our project so how do I close this part of the form so that I can check for compliance and submit? I just put "0" quantity but will that suffice?

Last reply: Susan Walter, May 7, 2015, 3:01 pm

T2, T4, T6

Healthcare-v2009 MRp2: PBT source reduction - mercury
posted by Gustavo De las Heras Izquierdo on Mar 13, 2014, 3:07 pm

This credit does not allow installing T9, T10 or T12 fluorescent lamps.

This credit provides a criteria to specify T5 and T8 fluorescent lamps.

Are there any requirement for T2, T4...

Last reply: Gustavo De las Heras Izquierdo, Mar 14, 2014, 1:59 pm

LEED Health Care 2009 MR Prerequisite 2: PBT Source Reduction

Healthcare-v2009 MRp2: PBT source reduction - mercury
posted by William Kelly on May 30, 2013, 9:37 am

For Uload L-14 providing calculations for collection space and projected waste:
1. Is there a rule of thumb that a certain size building will have ex-amount
of projected...

Last reply: Susan Walter, Mar 14, 2014, 1:19 pm

LEED Health Care 2009 MR Prerequisite 2: PBT Source Reduction

Healthcare-v2009 MRp2: PBT source reduction - mercury
posted by Andrea Breen on Jul 25, 2013, 5:25 pm

For testing fly ash to be used in concrete, for the 5 ppb limit, are there any sampling requirements? Is there a preferred method for testing to achieve this limit, either EPA Method 7471 or EPA...

Last reply: Susan Walter, Mar 14, 2014, 1:16 pm