My reviewer for this credit (MRc5) has questioned our usage of the location of the harvesting / extraction being the same as the manufacturer for the steel products. I contacted the steel company...

We will be salvaging furniture from a school already on our site, but we are not going for MR3 (Mat. Reuse) due to the limited amount. However, we might possibly use it for MRc5 (understanding...

If the harvest location cannot be determine, what figure should I use on my report? It has to be numerical.

For steel products, would the extraction location be the mill where it is produced?

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up February 25, 2013- 11:02 am Tim, I'm guessing you mean "now posting." Our data comes from LEED Online data for projects not registered as "confidential." This data is processed and posted by GBIG.org, and we in turn import key snapshots as part of the LEEDuser interface. So, if your project is not confidential and is certified, you shouldn't need to do anything more for it to be reflected here. We always welcome sharing of experiences in our forum, though. Log...

The “Special Considerations for MRc5” section on LEEDuser under Schools 2009 notes the following:
“The extraction location for the source of the...

It was unclear to me in the calculator above, but when I have a product, say a concrete mix, that includes materials that were harvested and then manufactured at different locations, how do I...

We recieved a list of materials that the reviewer asked for distance for
the extraction. We have one letter concerning one material that
involved quite a bit of cost and does bring...

Shall I included in calculation for Regional materials stay-in-place formwork ?

When calculating distance between the manufacturing plant & the project site, is the distance I should use, actual travel distance by land, or by "how the crow flies"?

I have a...