Log in
Forum » CS-2009 IEQc4.1
Topic

Basement carpark areas?

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Scott McMillan on Jul 2, 2015, 11:54 pm

As noted above the requirement is applicable to "All adhesives and...

Last reply: Ahmed Ashraf Abdelfattah, Sep 11, 2023, 3:00 am

Limits for VOC content outside US, additional questions

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Ernst Schriefl on Apr 17, 2019, 12:14 pm

All the limits on...

Determing VOC content outside of US

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Ernst Schriefl on Apr 5, 2019, 8:39 am

Yesterday we had a conversation with a US manufacturer who told us that the...

Last reply: Ernst Schriefl, Apr 17, 2019, 11:42 am

Asphalt primer + SBS modified

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Pawel Soszynski on Jul 20, 2018, 5:47 am

Hello,

I'm wondering what category I should put product used for surface primering. Normally these product are used outside, on the roof, but on my project we have to use it inside in the...

Pipe insulation sealant???

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Edgar Arevalo on Dec 14, 2017, 2:59 pm

I'm trying to figure out, under what category would pipe insulation joint sealant fall under?

I ask because I got a submittal for that type of product and it compares the products...

Putty with M1 emissions test, however VOC content unknown g/L

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Sara Johansson on Nov 2, 2017, 11:40 am

Hello,

We are looking at a floor putty with no...

Wall Putty VOC content measured in gram/kg

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Kavita Gusain on Sep 29, 2017, 4:49 am

The test certificate for...

Over limit adhesive used while building is open

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Jayme Antolik on May 31, 2017, 1:10 pm

I am on a project where the contractor used an adhesive that exceeds the...

Last reply: John-David Hutchison, LEED AP BD+C, PMP, Jun 2, 2017, 8:47 am

VOC information

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Lilian Seow on Oct 22, 2013, 5:46 pm

Is it necessary for manufacturer to indicate 'less water" for the...

Last reply: Patty Lloyd, Feb 17, 2017, 10:09 am

EPMD Membrane Adhesive

CS-2009 IEQc4.1: Low-emitting materials - adhesives and sealants
posted by Anna Bak on Oct 20, 2016, 7:40 am

In FAQs for IEQc4.2 I found an information that the actual weather barrier does not need to comply with the credit. I understand that we can treat EPMD Membrane as weather barrier. Does the...

Last reply: John-David Hutchison, LEED AP BD+C, PMP, Oct 25, 2016, 9:00 am