Hey all,

I'm sorry if this is a repeat, I tried to search for this specific issue in the forum, and cannot find anything.

This project has what is defined as single-zone spaces, and...

Dear all

In a project that we are certificating LEED C&S v3 the owner has modified the OPRs, specificly the project size and the MEP system.

1. The project size has increased...

We are working on IT/ITES project with above grade parking floors which are naturally ventilated. As per ASHRAE 62.1 TABLE 6-4 Note C - exhaust is not required if two or more sides comprise walls...

Hi,

I am working on C & S project wherein 4...

Hi all,

I'm working on a cold dark shell project where the owner is NOT building out any HVAC systems (only plumbing); the tenant will install everything. How do we complete IEQp1...

I received the following comment from a LEED reviewer;

"The LEED Form states that the project is mechanically ventilated and that the ventilation system has met the minimum requirements of...

To account savings using DCV, we understand that Baseline building ventilation is to be modeled using ASHRAE 62.1 whereas Proposed building ventilation is to modeled as designed.

However...

We have a project in which the location of the fresh air intake for the garage parking is proposed to be located

We are working on a shopping mall project in whcih there will be many retail spaces. Some of the tenants will design their own ventilation systems and provide their own AHUs. Could you confirm if...

Hi All,

We would like to get your opinion in the situation below if approach is acceptable to IEQp1:

We have an enclosed Driver’s lounge, Lift lobbies and Administration office at...