Hello, I am wonderinq if you can help me:
where no heating system exists the heating system classification shall be asummed to be electric, and the system characteristics shall be identical...

We have a comment back from...

Hallo everyone,
I am modeling a C&S project with 8 floors, and system 7 will be used in the Baseline Case. For system 7, usually each floor shall be modeled with a separate HVAC system...

Hallo everyone,
I have a question about...

Dear all,

I have just completed the EAp2 submittal with all the info and uploads associated, but when I put "Check Compliance", it does not turns the "N" (no) to a "Y" (yes). I have done a...

Good day,
I need to understand some thigs about 5.4, 8.4 and 10.4 of standar ashrae 90.1-2007.(My project is in Perú)
5.4- 5.4.1-'' Where insulation is required in 5.5 or 5.6, it...

Hello, i am modeling a C&S project- building of 22 floors. clime type:2A . I wander if someone can help me.

1.My proposed desing has restrooms with sistems of air extraction, it is a...

nice thread. very interesting. thanks for sharing this information.
team ina and clarke broome
...

Edit: question has already been answered in February 2012 here: http://www.leeduser.com/credit/CI-2009/EAp2
Didn't find it before,...

Assuming a 10 storey building where the first three floors are retail floors and the remaining 7 floors are office floors, is it generally possible to use the building area method?
Is it...