Hello, I am filling in my EAp2 template under LEED 2009 for Healthcare. Under Section 1.3 Advisory Messages, it says that I can find the data for this table in my Energy Pro outputs. However,...

We are pursuing Option 1 (Whole Building Simulation). In the Proposed Case we modelled the part load performance of the chiller based on the part load performance values (fraction of Full-Load...

We are computing energy performance for a major renovation project in the context of Core&Shell.
Modeling the proposed building model we are realizing some difficulties modeling the...

Requirements according to ASHRAE mandatory provision 5.4:
Cargo doors and loading dock doors shall be equipped with weather seals to restrict...

Hello,

If facade lighting are installed at the perimeter inside the building, should this be considered interior or exterior...

Our proposed building has no cooling system installed; it is ventilated naturally. Now Appendix G says to model the proposed building like the baseline bldg system. That means with a...

Assuming that I use the BAM for showing compliance with the minimum energy performance prerequisite do I have to use the BAM also at the simulation for EAc1?

It would be more meaningful to...

I’m working on a Core & Shell project that has as Energy source a District Heating that use only heat recovery from combustion of municipal solid waste, I would like to know if the compliance...

Hello!

I'm modelling a 49-story building using Design Builder, and it has three separate HVAC systems (the first one on the 16th floor for the first 15 floors, the second is on the 32nd...

I am wondering if the tenant lease agreement can be used to specify undesigned elements for EAp2 similar to how it is used to achieve other credits. For example, for the warehouse I am working on...