LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5903 thumbs up June 2, 2014- 2:29 pm In the future please post your questions and comments in only one of the energy-related forums. I monitor them all and would prefer not to have to reply twice. There is also a DES specific forum- http://www.leeduser.com/topic/new-district-energy-guidance-leed-released... Log in or register to post comments...

Hi, I am not sure about how to reset the CW leaving temperature in Baseline Case. If the design CW leaving temperature is 85℉ in my model, according to G3.1.3.11, the CW leaving temperature...

As it relates to occupancy sensors being installed in all 'back of house' spaces for this credit, what encompasses back of house spaces? Is there a comprehensive list? i.e. mechanical/electrical...

Dear All,

I am modeling a retail C&S shopping mall, whereby the developer wants to give a lighting power allowance provision of 50 W/m2 for the retails shops. No lighting fixtures will...

We are working on a project in Mexico City, to comply with the prerequisite 2 we are following Option 1, whole building energy simulation.
In the first simulation we´d done of the energy...

Hello Marcus.

I have a question regarding minimum air flows for a core and shell project.

the minimun cfm for the simulation must be the same in the energy model and IEQ p1 and IEQ...

If a mechanical design engineer adds a note on the mechanical schedules stating "...

Hello Markus.

We are planing to use LEED-CS Revised points thresholds based in Owner Energy percentage. However, it is not clear whether the percentage is calculated using the baseline or...

ASHRAE puts a requirement to keep in electrical services on the feeders max 2% voltage drop and on the branch circuits max 3%.
Is it possible to keep this 5% but split in any other way for...

Good afternoon,

My company is developing a LEED Core and Shell evaluation of a warehouse that does not have any climatization systems (it is considered "Unconditioned" because it has a...