Our project is an extension building that undergoes a major renovation on the HVAC-system and interior, but not exterior envelope, and even gets a new extension. In total, the existing gross area...

Hi,

I am developing a simulation (EAP2/LEED CS) for an existing building located in Rio de Janeiro. According with the Table G3.1.5, for the Baseline:

"Existing Buildings: For...

We have a campus projects with three relatively equal size multi-story buildings. The owner will manage the three buildings separately. Each project will pay for their own utilities. The power...

Hi, I have demand control ventilation for every...

Dear all,

our previous version of the baseline model in a C&S building had the same ventilation rates than the proposed. But, we were advised by the reviewer to change it in the zone...

I have a proposed design with boiler and chiller, with water distribution. There are many pumps in the distribution system. In the other hand, I have a baseline building with a system 5 (...

Dear All,

We are currently working on projects in Germany. Are you aware of any equivalent standards available at this moment or in the proces of approval?

Thanks in advance!

In a review, the reviewer told me that as a system type 5, I should model 2 identical boilers. With that change (without defining capacity, I guess eQuest do it by demand) the baseline energy use...

Hi,
In a Core and Shell model, for EAp2 (eQUEST), a LEED reviewer told me to define lighting and receptable loads meters. We have already defined the interior lighting in every space, so my...

in EAp2 Form Summary shows "N", but no error information provided, is this Form wrong?