Log in
Forum » CS-2009 MPR3
Loading...
Topic

LEED Project Baundary

CS-2009 MPR3: Must use a reasonable site boundary
posted by PAULA HERNANDEZ on Apr 15, 2016, 8:45 am

Hi,
We have a 16 story Building which is going into major renovations and we are thinkin on registering it as C&S for the certification.
The issue is that the Owner shares part of...

Last reply: Ignacio Lizasoain, Feb 21, 2018, 10:20 am

2 Buildings in the same lot

CS-2009 MPR3: Must use a reasonable site boundary
posted by Guillermo Alonzo on Jun 28, 2017, 5:40 pm

Hello from Colombia,

We have a C&S Project that has two different buildings (Hotel and offices building) in the same boundary. They share only three underground level parking garages...

Reasonable Site Boundary

CS-2009 MPR3: Must use a reasonable site boundary
posted by Mindaugas Mi on Dec 21, 2016, 1:29 pm

Dear Leeduser.com members.

I have a question regarding correct LEED boundary.

1. The building is being built on the whole site area (3 underground stories)
Contractor has...

Non-LEED-Certifiable Buildings on Site

CS-2009 MPR3: Must use a reasonable site boundary
posted by Krissy Buck on Aug 1, 2016, 6:17 pm

Hello everyone-

I have basically two questions in one, regarding how to treat additional buildings on your site.

Project Background: I have an 880,000 SF site. We are renovating...

LEED Boundary

CS-2009 MPR3: Must use a reasonable site boundary
posted by gabriel Morales on Apr 3, 2014, 6:03 pm

We have a project with 2 commercial towers being designed to certify in CS, on the same land owner 2 residential towers (not LEED) are located.

However the parking area is 100% of the...

Last reply: wachira sosaeng, Jul 30, 2016, 8:50 am

Required parking lots and LEED boundary Calculations

CS-2009 MPR3: Must use a reasonable site boundary
posted by kerry wang on May 25, 2016, 10:37 pm

Hi all,
We have a question about LEED boundary calculation as below:

In order to save the land, our company has set up a shared parking lot in the area, so this project does not...

Multiple Buildings or One Building Certificacion

CS-2009 MPR3: Must use a reasonable site boundary
posted by PAULA HERNANDEZ on Feb 24, 2016, 5:22 am

We have a C&S Project that has two identical buildings in the same parcel. They share three underground level parking garajes.
We want to certify both buildings and their undergrounds...

Certify only a few stories

CS-2009 MPR3: Must use a reasonable site boundary
posted by Citlali Mora Bello on Jun 15, 2015, 1:38 pm

Hello,

Can a building tower be certified only a few floors?

The justification is that the tower is owned by different parties, and not all of them wants the certification. So the...

Last reply: Karin Miller, Aug 7, 2015, 3:36 pm

Exlude retail zone

CS-2009 MPR3: Must use a reasonable site boundary
posted by gabriel Morales on Sep 9, 2014, 3:41 pm

Hello, in the reference guide mention the following: When land not owned by the LEED project owner may be included

Land that the LEED project owner does not own (i.e., leases, has an...

When land not owned by the

CS-2009 MPR3: Must use a reasonable site boundary
posted by gabriel Morales on Sep 9, 2014, 3:39 pm

When land not owned by the LEED project owner may be included
In the guidance of MPR reports the following:

Land that the LEED project owner does not own (i.e., leases, has an...