Log in
Forum » CI-2009 IEQp1
Topic

LIFT Lobbies to be included in VRP Calculations

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Preethi Ranjith on Feb 11, 2015, 2:12 am

i want some clarity on whether it is necessary to include Lift lobbies in VRP calculation to demonstrate compliance under IEQp1 and IEQc2? These lift lobbies are not regularly occupied. Hence is...

"Determination of Ds Value for worst case scenario"

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Cyriac Joseph on Dec 24, 2014, 12:32 pm

How do we calculate the Ds value for the condition where "The cooling load is low due to minimal envelope and internal loads but the number of occupants are at peak?"
We have the following...

IEQp1 using indoor packaged DX units

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Edgar Arevalo on Dec 19, 2014, 11:53 am

I'm in a bit of a funk. I have a office space that populates two floors of a building. Each space is using one existing packaged DX indoor system per floor and will distribute heating via...

Last reply: Edgar Arevalo, Dec 24, 2014, 10:20 am

LEED 2009 CI Preliminary Combined Review

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Aparna Maladkar on Dec 18, 2014, 10:11 am

Hello,
I am new to LEED and need some assistance before issuing for preliminary combined review. I have completed all the required project and pre-requisites forms. However to what extent...

Last reply: Aparna Maladkar, Dec 18, 2014, 11:41 am

IEQp1- LEED CI 2009

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Aparna Maladkar on Dec 18, 2014, 10:05 am

Hi,
I have completed an offline (active) IEQp1 form which shows that pre-requisites are being met. When I complete the same form online, the result is that the pre-requisites are not being...

Last reply: Mike D, Dec 18, 2014, 10:14 am

Supplementary mechanical ventilation in naturally ventilated

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Michael Smithing on Dec 15, 2014, 10:05 pm

Our project is primarily naturally ventilated and meets the requirements of Section 5.1 in non-core areas. We have added mechanical ventilation to the core areas which meet the requirements of...

MIXED MODE Ventilation

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Sathish Kumar on Nov 11, 2014, 1:08 am

May i know, what are the documents are providing clarity on designing the mixed mode ventilation strategies?

IEQp1 Design Review told me I have multizone not single

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Kasandra Martin on Oct 29, 2014, 9:03 am

I have roof top units. Each serves several rooms. One system serves a single room with single thermostat. However the rest of them serve several rooms and instead of one thermostat to the RTU I...

Mech. exhaust fan required for a naturally ventilated project?

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Ron Dean on Feb 17, 2014, 6:24 pm

I'm working in a small project with natural ventilation overall.
Considering these 3 facts:

1. LEED states to comply with sections 4-7 of ASHRAE 62.1-2007.
2. Natural...

Last reply: Paula Hernandez, Aug 26, 2014, 3:36 pm

ASHRAE 62.1

CI-2009 IEQp1: Minimum indoor air quality performance
posted by Mike D on Jul 29, 2014, 11:09 am

Clause 5..9 in ASHRAE 62.1 requires...