In the forum discussion I found the note the number of required bycicle parking spaces depends on the no.

We recently purchased a 7,000 SF, 1-story office building for our own use. We are attempting LEED CI Platinum but are not touching the exterior walls or roof.

Has anyone had any luck submitting materials that are "self-declared" compliant from the manufacturer?

I need help with determining proper case for the Air Distribution Configuration per table per Table 6-2. The forth entry required a velocity of 150 cfm to be reached within 4.5 ft of floor levels.

Hello. We have a building looking to meet the requirements for Option 1 Path 2. In the credit language it states that the flush is to stop at the end of occupancy for that day.

Hi everybody... again. Does anybody know if manufacturers' letters are accepted as proper documents to proof VOC levels?

Hello, I am involved in a Medical Device facility that is pursuing LEED evaluation. It was built and operates since three years ago outside the US.

We are modeling a classroom building. The building is 55% renovated, and 45% new construction. We are renovating the major HVAC systems, exterior envelope, and building interior.

My development density radius just touches a 92,000 square foot hotel, which will kick me over the 60,000 sq ft per acre limit.

Hi everybody! Do you have any experience or suggestions on how to deal with application of polyurethane / epoxy flooring system in underground garage floors in scope of IEQc3? Is temporary sealing