Our building is fully occupied by the same company, so all the floors have similar open space layout, except for enclosed managers or small meeting rooms. There´s an outside air intake in each AHU

We are working on certifying a building (EBOM 2009) and we want to use the Minimum Indoor Air Quality Performance Calculator  

Hello,

Hello,

How to answer the following requirement in the IEQp1 form when you already filled the Minimum IEQ perfromance calculator with all occupiable zones in it and it has already automatically selected th

We are working on certifying a building that has demand-controlled ventilation (DCV), controlled by CO2 sensors.

I try to fill out the ASHRAE 62MZ calculator and have some problems with it: 1) We have lots of AHUs in our building (Some Vanitlation systems, some AC-systems and some are only exhaust systems).

We've had a designer tell us that built-in furniture and case work (like a fan-coil unit enclosure) can be deducted from the square footage of a room when calculating the window opening requirement

Hello; Out BAS does not measure air flow (CFM), but, it does measure Return Air and OA C02 values. Can this PreReq be met using CO2 measurement (demand ventilation) rather than CFM?

In our building we have two main AHU that supply 26 AHU (one for each floor of the building) and then we have VAVs for each zone in each floor. Do I need to perform measurements just in the two ma