Dear All we have done daylight analysis for factory building. we get daylight of 85% in 9 AM and 73 % in 3AM (Date -21 - September) In this case which value we take to enter in V2009 Spread shee

Has anyone worked on an Air national Guard traning facility and been able to determine which areas are considered regularly occupied?

I'm using the Option 2 - Prescriptive Approach for this credit, In particular room has 6 windows and each side two and one side no windows.

Hi, Guys I have a residential project, each housing unit has a balcony in front of side window of the living room, should i need to consider shading impact of balcony when using OPTION 2.

I have a large conference room with a folding partition to create two smaller conference rooms. Do I run the simulation with the partition open (one large room) or closed (two small rooms)?

Hello, Do Glass Doors count as windows and require automatic glare control?

Dear All, I am using Daylighting module of Design Builder V3 for IEQc8.1 daylight calculations and it gives very different results (less light) than the calculations conducted with Ecotect+Radianc

We have some projects in which regularly occupied spaces are designed with no-windows because of client's requirements. These are process areas (a kitchen and a laboratory).