I am starting to see a specification for 3. Dry-Fog Coatings: VOC not more than 400 g/L. in MasterSpec and some projects' LEED specs.

Which one from the table that suits for Synthetic Gloss Enamel paint, that use for painting metals?

The project is a 2 storied garment factory located in Bangladesh where they use Industrial Enamel alkyd based paints which has a VOC of 438 g/L.

Is there any restrictions on using UV Lacquers?

Hi, I'm currently reviewing a submittal for Fire-stopping Intrumescents and Mortar Products, applied on the interior of the building Envelope on a Project we are working on.

This is for cleaning pipes prior actual coating and painting application. I understand that this solvent does emit strong odor and as such application after hours is preferred.

I have a number of items used for concrete - Form Release Compounds and Concrete Surface Retarders, as well as Cable pulling Lubricant used by the electricians on my project.

The link to Rule 1113 in the Resources tab above is broken. By searching the SCAQMD website (and Google), I can only find the most current version of Rule 1113.

Dear all, The Contractor needs to install anti-corrosive paints / coatings for one project. The anti-corrosive system consists of 2 products (the first being an epoxy primer and the second being

I was wondering if somebody can explain to me the following: In the Table 1 of the IEQc4.2 where the voc limits of the different categories are listed, what excatly ceiling limit means?