We are working on a multifamily residential building where lighting fixtures are only specified for bathrooms, kitchens & hallways while the bedrooms and living/dining rooms are supposed to hav

Let's say we have a HVAC supply fan of a baseline which is calculated to be 3,000 cfm and the baseline fan power at 0.001 kW/cfm.This makes the fan power to be 3 kW.

Hello Marcus, Can we consider the savings from renewable energy (solar pv) in the energy simulation? We do not have the minimum 10% without renewable energy. KC

Hello, I've searched the forum but haven't found a definite answer.

I put this comment in a reply below, but I'm afraid it wont be seen, so I'm starting a new thread... We are renovating an existing historic building which included window replacements, furring out

Hi Guys~ I have a question... As you know, to comply ASHRAE 90.1 Mandatory Provision, we should perform NFRC 400 Test.

Has anyone ever experienced process load lower than 25%? We are working on a museum currently having process energy cost equal to 16% of the total baseline energy cost.

We are investigating how a building which houses a central chilled water plant for a campus can meet the prerequisite.

Dear all, In the selection of the HVAC system for baseline according to Table G3.1.1A should the unconditioned underground parking pavements be considered in the number of floors of the building?

Hi everyone, I'm currently working on a major renovation project.