Can somebody confirm that site applied paints, coatings, flooring, insulation, site applied adhesives and sealants need to meet the newer testing V1.1-2010, CA Section 01350.

What if the project is located inside a 30-year old building with AHU supplying less than 10% fresh air rate? As we have to use the centralized ventilation system and we couldn't make any change t

I am having a similar problem like many who have posted here with no reply. Could you please provide guidance as to how to interpret the Institute of Transportation Engineers tables?

I am looking for clarification on what is considered to be 'overhead vegetation.' Per the LEED v4 Reference Guide, "a minimum of 25% of outdoor space must be vegetated or have overhead vegetated c

Hi Elliot, Could you confirm that plaza and pedestrian only paths, being right-of-ways, can be used to define the end of a block length? Thanks

If we are proposing new construction, major renovation, how would this credit work? --If there is minimal exterior site on a large building.

Our project provides water quality treatment of a majority of the stormwater prior to discharging from the stormwater best management practices at the site.

Hi, We are working in a Core and Shell project that was registered after april, 2016, from that date to comply with the pre requisite we need to achieve at least 14% savings, We want to know if th

Would resinous flooring be evaluated under the Flooring or Paints & Coatings category?

V4 cites the MPR requirement to build on already existing land as a requirement for CI projects. Isn't that a given?