Dear all,

we are facing issues finding a laboratory with ISO/IEC 1702 accreditation to perform the indoor air quality tests.

We are approaching the start date of our IAQ assessment and I would like to be 100% sure that I need to include owner supplied furniture in the test.

Dear all, 

Our IAQ test results show compliance for all parameters except for Fromaldehyde, which is 27.50 PPB , meaning that it is only 0.50 PPB above the threshold.

My project is a new construction hockey arena pursuing Option 1, Path 1 for the flush out. The thing is, we have ice. Ambient temperatures will not be above 60 degrees. 

Hi all, 

Can equipment UVGI (Ultraviolet germicidal irradiation) be used during the test? 

Shall that be permantly installed? 

Hello,

I am working on one of the GBCI comments for NC v4 project - in which I am being asked to provide the following:

Are direct reading method acceptable for the reading of parameters for Particulates, CO2, CO and Ozone? The reference method used are complied to the Leed however.

Hi all,

Show of hands for those that have used Option 1, Path 2, post occupancy flush out:

Do you provide trending data for both phases, or just the preliminary phase?

I'm try to figure out how many tests I need to run for EQ3 V4.